Time And Date Setting; Figure 196 Menu 24: System Maintenance; Table 96 Call History Fields - ZyXEL Communications P-202H V2 User Manual

P-202H Plus v2 User's Guide
The following table describes the fields in this menu.

Table 96 Call History Fields

FIELD
Phone Number
Dir
Rate
#call
Max
Min
Total
You may enter an entry number to delete it or '"0" to exit.

30.3 Time and Date Setting

The Real Time Chip (RTC) keeps track of the time and date. There is also a software
mechanism to set the time manually or get the current time and date from an external server
when you turn on your ZyXEL Device. Menu 24.10 allows you to update the time and date
settings of your ZyXEL Device. The real time is then displayed in the ZyXEL Device error
logs and firewall logs.
Select menu 24 in the main menu to open Menu 24 - System Maintenance, as shown next.

Figure 196 Menu 24: System Maintenance

Enter 10 to go to Menu 24.10 - System Maintenance - Time and Date Setting to update the
time and date settings of your ZyXEL Device as shown in the following screen.
289
DESCRIPTION
This is the telephone number of past incoming and outgoing calls.
This shows whether the call was incoming or outgoing.
This is the transfer rate of the call.
This is the number of calls made to or received from that telephone number.
This is the length of time of the longest telephone call.
This is the length of time of the shortest telephone call.
This is the total length of time of all the telephone calls to/from that telephone
number.
Menu 24 - System Maintenance
1. System Status
2. System Information and Console Port Speed
3. Log and Trace
4. Diagnostic
5. Backup Configuration
6. Restore Configuration
7. Upload Firmware
8. Command Interpreter Mode
9. Call Control
10. Time and Date Setting
11. Remote Management Setup
Enter Menu Selection Number:
Chapter 30 System Maintenance