Figure 79 Menu 2.1 Isdn Advanced Setup; Table 57 Menu 2 Isdn Setup - ZyXEL Communications P-202H V2 User Manual

P-202H Plus v2 User's Guide

Table 57 Menu 2 ISDN Setup

FIELD
Analog Call
Routing
Global Analog Call Select how to handle global analog calls. The choices are Accept and Ignore.
Edit Advanced
Setup
Edit NetCAPI
Setup
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to Confirm..." to
save your configuration, or press [ESC] at any time to cancel.
17.2.1 ISDN Advanced Setup
Select Yes in the Edit Advanced Setup field of Menu 2 - ISDN Setup to display menu 2.1 as
shown later.

Figure 79 Menu 2.1 ISDN Advanced Setup

Phone 1 Call Waiting= Disable
Phone 2 Call Waiting= Disable
Calling Line Indication= Enable
PABX Outside Line Prefix=
PABX Number (Include S/T Bus Number) for Loopback=
Outgoing Calling Party Number:
Hangup Silence Time(sec)= 0
Data Link Connection= point-to-multipoint
173
DESCRIPTION
Select the destination for analog calls. The choices are A/B Adapter 1, A/B
Adapter 2 and Ignore. This field is only applicable when Incoming Phone
Number Matching is Don't Care.
This field is not applicable when the Analog Call Routing is Ignore.
Advanced setup features are configured when you select Yes to enter Menu 2.1 -
ISDN Advanced Setup.
Press the [SPACE BAR] to select Yes or No. Select Yes to configure Menu 2.2 -
NetCAPI Setup (discussed next).
Menu 2.1 - ISDN Advanced Setup
ISDN Data =
A/B Adapter 1 =
A/B Adapter 2 =
Press ENTER to Confirm or ESC to Cancel:
Chapter 17 Menu 2 ISDN Setup