Navigating The Smt Interface; Table 53 Main Menu Commands - ZyXEL Communications P-202H V2 User Manual

P-202H Plus v2 User's Guide
Table 52 SMT Menus Overview (continued)
MENUS
27 VPN/IPSec Setup

15.5 Navigating the SMT Interface

The SMT(System Management Terminal) is the interface that you use to configure your
ZyXEL Device.
Several operations that you should be familiar with before you attempt to modify the
configuration are listed in the table below.

Table 53 Main Menu Commands

OPERATION
Move down to
another menu
Move up to a
previous menu
Move to a "hidden"
menu
Move the cursor
Entering
information
Required fields
N/A fields
161
SUB MENUS
27.1 IPSec Summary
27.2 SA Monitor
27.3 View IPSec Log
KEYSTROKE
[ENTER]
[ESC]
Press [SPACE
BAR] to change No
to Yes then press
[ENTER].
[ENTER] or [UP]/
[DOWN] arrow
keys.
Type in or press
[SPACE BAR], then
press [ENTER].
?
< > or ChangeMe All fields with the symbol <?> must be filled in order to be
<N/A>
27.1.1 IPSec Setup
DESCRIPTION
To move forward to a submenu, type in the number of the
desired submenu and press [ENTER].
Press [ESC] to move back to the previous menu.
Fields beginning with "Edit" lead to hidden menus and have
a default setting of No. Press [SPACE BAR] once to change
No to Yes, and then press [ENTER] to go to the "hidden"
menu.
Within a menu, press [ENTER] to move to the next field. You
can also use the [UP]/[DOWN] arrow keys to move to the
previous and the next field, respectively.
When you are at the top of a menu, press the [UP] arrow key
to move to the bottom of a menu.
You need to fill in two types of fields. The first requires you to
type in the appropriate information. The second allows you
to cycle through the available choices by pressing [SPACE
BAR].
able to save the new configuration.
All fields with ChangeMe must not be left blank in order to
be able to save the new configuration.
Some of the fields in the SMT will show a <N/A>. This
symbol refers to an option that is Not Applicable.
Chapter 15 Introducing the SMT
27.1.1.1 IKE Setup
27.1.1.2 Manual
Setup