VoIP Configuration ..................29 VLAN Based Configuration Note ................. 32 Environment ....................32 WAN Configuration..................32 INTERNET Service ................. 33 IPTV Service ................... 36 Interface Grouping................... 38 Verification...................... 40 Quality of Service Application Note..............42 All contents copyright (c) 2009 ZyXEL Communications Corporation.
Page 3
How do I used the reset button, more over what field of parameter will be reset by reset button? ................64 How does the device support TFTP? ............64 Can the device support TFTP over WAN? ..........64 All contents copyright (c) 2009 ZyXEL Communications Corporation.
Page 4
Why the 2.4 Ghz Frequency range?............74 What is Server Set ID (SSID)? ..............75 What is an ESSID? .................. 75 How do I secure the data across an Access Point's radio link? ....75 All contents copyright (c) 2009 ZyXEL Communications Corporation.
Page 5
What is the difference between No authentication required, No access allowed and Authentication required? ............77 What is AAA? ..................78 What is RADIUS? ................... 78 What is WPA? ..................78 What is WPA-PSK?................. 78 All contents copyright (c) 2009 ZyXEL Communications Corporation.
VoIP technology with SIP signaling protocol. Additionally, it is designed with dual WAN function, suitable for xPON or WiMax users. Users can also leverage the USB interface in P-2812HNU-51c for file sharing or together with 3G USB dongle for 3G backup.
ATM network without changing the CPE. Quality of Service (QoS) The P-2812HNU-51c series equipped with both ATM and IP QoS features. Service provider can base on their service plan, freely design their QoS policy and prioritize the mission-critical services such as IPTV and VoIP. This increases both network efficiency and productivity to enable service providers to bring real multi-play into the residential user’...
2. DHCP server enabled with IP pool starting from 192.168.1.33 3. Default username/password = admin/1234 Setting up the PC (Windows OS) 1. Ethernet Connection for LAN access All PCs must have an Ethernet adapter card installed 2. TCP/IP Installation All contents copyright (c) 2009 ZyXEL Communications Corporation.
Page 10
Windows CD or disk. When the drivers are updated, you will be asked if you want to restart the PC. Make sure that your Device is powered on before answering “Yes” to the prompt. Repeat the above steps for each Windows PC on your network. All contents copyright (c) 2009 ZyXEL Communications Corporation.
Set up your PC/NB IP address to be a DHCP client. Connect to a LAN port of P2812HNU-51c via RJ45 Ethernet cable and open your IE browser. default P2812HNU-51c https://192.168.1.1 username/password = admin/1234. All contents copyright (c) 2009 ZyXEL Communications Corporation.
Connect to a LAN port of P2812HNU-51c via RJ45 Ethernet cable and open your Hyper Terminal software (capable of using TELNET). The default IP of P2812HNU-51c is 192.168.1.1 username/password = admin/1234. Type the command line “atsh” to display the basic information of device. All contents copyright (c) 2009 ZyXEL Communications Corporation.
Ethernet WAN is used.) Scenario: The P2812HNU-51c is a CPE bridge. a. Bridge Mode Go to Network > WAN > Internet Connection. Click Add Select the Layer 2 interface for this service, e.g “eth4.100” All contents copyright (c) 2009 ZyXEL Communications Corporation.
Page 14
P-2812HNU-51C Support Notes Click Next Select the WAN service type, i.e. “Bridging” Enter the Service Description or use the default value. Configure Rate Limitation, or set up VLAN ID if needed. Click Next All contents copyright (c) 2009 ZyXEL Communications Corporation.
Page 15
P-2812HNU-51C Support Notes Click Apply/Save, and then the WAN bridge interface (ETH/Bridge) just configured will be displayed on the Network>WAN>Internet Connection page. All contents copyright (c) 2009 ZyXEL Communications Corporation.
Select the Layer 2 interface for this service, e.g. “ptm0/(0_0_1)” Click Next Select the WAN service type, i.e. “IP over Ethernet” Enter the Service Description, or use the default values. Configure Rate Limitation, or set up VLAN ID if needed. All contents copyright (c) 2009 ZyXEL Communications Corporation.
Page 17
Select Obtain an IP address automatically. There is also the option to set a static IP. Please select the option that fit in the current topology. 10. Click Next 11. Select Enable NAT 12. Option to select IGMP Multicast Proxy if needed. All contents copyright (c) 2009 ZyXEL Communications Corporation.
Page 18
Backup WAN function support). Priority order can be changed by removing all and adding them again. 14. Use the Arrow button to move the interface just created to the Box on the left (Selecte4d Default Gateway Interface.) All contents copyright (c) 2009 ZyXEL Communications Corporation.
Page 19
DNS server IP addresses for the system. In ATM mode, if only a single PVC with IPoA or static IPoE protocol is configured, Static DNS server IP addresses must be entered. 17. Click Next 18. Click Apply/Save All contents copyright (c) 2009 ZyXEL Communications Corporation.
2. Select ATM from the Interface drop down list. And Click on “Add”. 3. Configure new PVC’ s VCI/PCI(0/34), and Select DSL Link Type EoA (EoA is for PPPoE, IPoE, and Bridge.) 4. Select Connection Mode (Default Mode). All contents copyright (c) 2009 ZyXEL Communications Corporation.
Page 21
5. Option to enable Quality of Service is also available on the bottom of this page. 6. Click on “Apply/Save”, then the creation of new PVC is completed. 7. The new created PVC will be displayed on Network > WAN >Layer2 Interface. All contents copyright (c) 2009 ZyXEL Communications Corporation.
Page 22
P-2812HNU-51C Support Notes Scenario: The P2812HNU-51c is a PPPoE client. c. PPPoE Mode Go to Network > WAN > Internet Connection. Click Add. Select the ATM interface for this connection. All contents copyright (c) 2009 ZyXEL Communications Corporation.
Page 23
10. Enter the PPPoE Service Name, e.g. “PPPoE” 11. Select the Authentication Method to be “AUTO” 12. Click Next 13. Select the WAN Interface, and move it to the box on the left for the default All contents copyright (c) 2009 ZyXEL Communications Corporation.
Page 24
15. Select Obtain DNS info from a WAN interface. Like the default gateway interface configuration, the WAN interfaces to be adopted can be adjusted by using the Arrow button. 16. Click Next All contents copyright (c) 2009 ZyXEL Communications Corporation.
Page 25
P-2812HNU-51C Support Notes 17. Click Apply/Save, and the newly configured PPPoE connection over ADSL Wan interface is displayed. All contents copyright (c) 2009 ZyXEL Communications Corporation.
After that, the CPE updates the information by periodic queries. The device implementation of IGMP is also compatible with version 1. The multicast setting can be turned on or off on the Ethernet and remote nodes. All contents copyright (c) 2009 ZyXEL Communications Corporation.
Go to Network > WAN > Internet Connection Select the WAN interface (IPoE or PPPoE)and click on Edit Go the page where IGMP Multicast Proxy shows Select “Enable” for IGMP Multicast Click Next till we can Apply/Save it All contents copyright (c) 2009 ZyXEL Communications Corporation.
It will enable them to upgrade their existing systems while embracing Internet technologies such as the Web, email, instant messaging, presence, and video conferencing. It will also allow existing VoIP systems to interface with conventional PSTN and mobile phone networks. All contents copyright (c) 2009 ZyXEL Communications Corporation.
SIP account to. In this example, the SIP account will be applied to Phone1. 3. Go to VoIP>SIP>SIP Service Provider. Fill in SIP Service Provider’ s SIP server URL/IP address. All contents copyright (c) 2009 ZyXEL Communications Corporation.
Page 30
4. Click “Apply”. You will see a pop-up window displayed and prompting you to bind the SIP account/SIP service provider settings to a particular WAN interface. 5. Click “Advanced” to expand the Advanced Menu. All contents copyright (c) 2009 ZyXEL Communications Corporation.
Page 31
6. Select Multi_WAN and WAN interface for VoIP service. In this example please select ptm0_102. 7. Leave all other advanced configuration as they are from Default configuration. 8. You should now be able to make/receive VoIP calls. All contents copyright (c) 2009 ZyXEL Communications Corporation.
VID=301 and the IPTV traffic is tagged with a VID=401. The COE (VDSL switch) receives the already VLAN tagged traffic from the CPE, and handles them according to their VID values. So how should we configure the P-2812HNU-51c to fit the aforementioned scenario? The following step-by-step procedure shows how.
VLAN ID 301. Choose PTM layer 2 interface for the Internet connection. Choose “PPPoE connection”, and name it “Internet”. Then assign the VLAN ID 301 (set 802.1P priority to the desired value.) All contents copyright (c) 2009 ZyXEL Communications Corporation.
Page 34
Fill in the PPPoE connection credentials (valid PPPoE username and password), and enable NAT. Click Next. Move the “ppp0.301” WAN interface just created to the box on the left for default gateway. Click Next. All contents copyright (c) 2009 ZyXEL Communications Corporation.
Page 35
Note: QoS is enabled by default for PTM Layer2 interface. 12. Click on “Apply/Save”, and the “Internet” data interface is configured. 13. The Internet.301 WAN interface connection will be shown on the list along with default internet connections. All contents copyright (c) 2009 ZyXEL Communications Corporation.
Select “Bridge” for the WAN service type. Enter the Service Description, e.g. “IPTV”. Check the Tag VLAN ID for egress packets box. Enter “4” for Enter 802.1P Priority. Enter “401” for Enter 802.1Q VLAN ID. All contents copyright (c) 2009 ZyXEL Communications Corporation.
Page 37
The INTERNET LED should be lit, and Internet access should not be a problem. Otherwise, repeat the steps to make sure all the configurations are correct. After setting up WAN interfaces, the next step is to group the WAN interfaces with All contents copyright (c) 2009 ZyXEL Communications Corporation.
4. Select “IPTV.401/ptm0.401” for the WAN Interfaces used in the grouping. 5. Move LAN3, and LAN4 from the “Available LAN Interfaces” box on the right to the box of “Grouped LAN Interface” on the left. 6. Click “Apply”. All contents copyright (c) 2009 ZyXEL Communications Corporation.
Page 39
IPTV interface. 8. Go to Network >LAN >IP. Be sure to choose the correct group name to enable the IGMP Snooping function. 9. Select “IPTV” as the Group Name to configure. All contents copyright (c) 2009 ZyXEL Communications Corporation.
P-2812HNU-51C Support Notes 10. Check the box to enable the IGMP Snooping Function, and then “Apply” the setting. Verification 1. Ping from LAN NB to “168.95.1.1” (any IP or website on the WAN side). All contents copyright (c) 2009 ZyXEL Communications Corporation.
Page 41
P-2812HNU-51C Support Notes 2. IPTV server starts to play multicast stream, and checks whether the TV can receive the multicast stream. All contents copyright (c) 2009 ZyXEL Communications Corporation.
Quality of Service Application Note Environment The “Quality of Service” feature in P-2812HNU-51c has the ability to assign different tasks in accordance with the chosen type of traffic. In the case of the above diagram, we would like to limit the maximum upload rate of the IPTV service to 350 kbps.
Page 43
P-2812HNU-51C Support Notes Go to WAN > Internet Connection, and Edit IPTV.401 WAN Internet Connection. Set the Rate Limit to “350”, and click on “Next”. All contents copyright (c) 2009 ZyXEL Communications Corporation.
Page 44
In our VLAN based scenario configuration a delicate WAN Interface was created only for IPTV traffic. Therefore, to limit the upstream IPTV traffic, configuring the Rate Limit in the delicate WAN interface is enough. All contents copyright (c) 2009 ZyXEL Communications Corporation.
The WEP has defenses against this attack. To avoid encrypting two cipher texts with the same key stream, an Initialization Vector (IV) is used to augment the shared WEP key (secret key) and produce a different RC4 key for each packet. The IV is also All contents copyright (c) 2009 ZyXEL Communications Corporation.
Page 46
You need to specify one of the 4 keys as default Key for data encryption. To set up the Access Point, you will need to set one of the following parameters: All contents copyright (c) 2009 ZyXEL Communications Corporation.
Protocol (CCMP) in it and offers stronger encryption then WPA uses (TKIP). WPA2 encryption keys that are used for each client on the network are unique and specific to that client. Eventually, each packet which is sent over the air is encrypted with a All contents copyright (c) 2009 ZyXEL Communications Corporation.
AES (Advanced Encryption Standard), WPA2’ s level and standard is requirement for some corporate and government users. Wireless Configuration Activate the WLAN interface of the P-2812HNU-51c and connect the notebook (802.11bgn wireless NIC required) under the WPA-PSK as its security mode. a. Wireless Setup.
Page 49
P-2812HNU-51C Support Notes Advanced Configuration: 10. Go to Network > Wireless LAN > Advanced. 11. On this page, you can configure advanced configuration such as allowed Wireless clients, Multicast rate, and 802.11 Mode. All contents copyright (c) 2009 ZyXEL Communications Corporation.
Page 50
P-2812HNU-51C Support Notes All contents copyright (c) 2009 ZyXEL Communications Corporation.
(AP) or a Registrar of the network. PBC Method: A simple action of “push button” suffices the process to activate the security of the wireless network and at the same time be subscribed in it. All contents copyright (c) 2009 ZyXEL Communications Corporation.
You can either click the button located on the top right corner of P2812HNU-51C or from Network>Wireless LAN>WPS page. After clicking on the button, the P2812HNU-51C and the WLAN client have 120 seconds to connect. All contents copyright (c) 2009 ZyXEL Communications Corporation.
Page 53
GUI indicating that the AP and the WLAN clients are connecting to each other. After successfully connecting to each other through WPS, the successful connection message will be displayed on the status bar on the GUI. All contents copyright (c) 2009 ZyXEL Communications Corporation.
Page 54
P-2812HNU-51C Support Notes All contents copyright (c) 2009 ZyXEL Communications Corporation.
Go to Maintenance > Logs > Log Settings. Check the Active box. Select the preferred “Log Level”. Select the logging Mode to specify the location to store the event logs. Click “Apply”. All contents copyright (c) 2009 ZyXEL Communications Corporation.
P-2812HNU-51C Support Notes View the log in the Web GUI. Go to Maintenance > Logs > View Logs. All contents copyright (c) 2009 ZyXEL Communications Corporation.
Maintenance Procedure Upgrading firmware Go to Maintenance > Tools > Firmware. Click “Browse”. Select the Firmware to upload and click “Open”. Click “Upload”. Backing-up the Configuration Go to Maintenance > Tools > Configuration. All contents copyright (c) 2009 ZyXEL Communications Corporation.
Page 58
P-2812HNU-51C Support Notes Click “Backup”. Click “Save”. Select the directory to save and click Save. All contents copyright (c) 2009 ZyXEL Communications Corporation.
P-2812HNU-51C Support Notes Upload Configuration Go to Maintenance > Tools > Configuration. Click “Browse”. Select the configuration file to upload and click “Open”. All contents copyright (c) 2009 ZyXEL Communications Corporation.
P-2812HNU-51C Support Notes Restoring to Factory Default Go to Maintenance > Tools > Configuration. Click “Reset”. All contents copyright (c) 2009 ZyXEL Communications Corporation.
Page 61
P-2812HNU-51C Support Notes This action will reset the entire configuration made by the users back to Factory Default. Please use this function with caution. All contents copyright (c) 2009 ZyXEL Communications Corporation.
ISP uses PPPoE. Why does my provider use PPPoE? PPPoE emulates a familiar Dial-Up connection. It allows your ISP to provide services using their existing network configuration over the broadband connections. Besides, All contents copyright (c) 2009 ZyXEL Communications Corporation.
If your company does not have a domain name, it means that your ISP provides you with a dynamic IP address. Suppose your company's e-mail address is mycompany@ispname.com. Jane and John will able send e-mail through device using "jane"<mycompany@ispname.com> "john"<mycompany@ispname.com> All contents copyright (c) 2009 ZyXEL Communications Corporation.
TFTP (Trivial File Transfer Protocol) over LAN. Can the device support TFTP over WAN? Although TFTP should work over WAN as well, it is not recommended because of the potential data corruption problems. All contents copyright (c) 2009 ZyXEL Communications Corporation.
NAT based on RFC 1631, and we call this feature as 'Multi-NAT'. For more information on IP address translation, please refer to RFC 1631, The IP Network Address Translator (NAT). All contents copyright (c) 2009 ZyXEL Communications Corporation.
In Many-to-Many Overload mode, the device maps the multiple ILA to shared IGA. 4. Many to Many No Overload In Many-to-Many No Overload mode, the device maps each ILA to unique IGA. 5. Server All contents copyright (c) 2009 ZyXEL Communications Corporation.
2 sets since there is only one remote node. The default SUA (Read Only) is a convenient, pre-configured, read only, Many-to-One mapping set, sufficient for most purposes and helpful to people already familiar with SUA in previous ZyNOS versions. All contents copyright (c) 2009 ZyXEL Communications Corporation.
IP address to a static hostname. Whenever the ISP assigns you a new IP, the device sends this IP to the DDNS server for its updates. Wireless FAQ What is a Wireless LAN? All contents copyright (c) 2009 ZyXEL Communications Corporation.
What are the disadvantages of Wireless LANs? The speed of Wireless LAN is still relative slower than wired LAN. The most popular wired LAN is operated in 100Mbps, which is almost 10 times of that of Wireless LAN All contents copyright (c) 2009 ZyXEL Communications Corporation.
However, depending on signal quality and how many other people are using the wireless ethernet through a particular Access Point, usable speed will be much less (on the order of 4 or 5 Mbps, which is still substantially faster than most dialup, cable All contents copyright (c) 2009 ZyXEL Communications Corporation.
Yes. As long as the products comply to the same IEEE 802.11 standard. The Wi-Fi logo is used to define 802.11b compatible products. Wi-Fi5 is a compatibility standard for 802.11a products running in the 5GHz band. All contents copyright (c) 2009 ZyXEL Communications Corporation.
In general, metals and substances with a high water content do not allow radio waves to pass through. Metals reflect radio waves and concrete attenuates radio waves. The amount of attenuation suffered in passing through All contents copyright (c) 2009 ZyXEL Communications Corporation.
Access Points must be used to connect to the wired LAN backbone. Wireless clients have their configurations set for "infrastructure mode" in order to utilize access points relaying. All contents copyright (c) 2009 ZyXEL Communications Corporation.
The ISM band is populated by Industrial, Scientific and Medical devices that are all low power devices, but can interfere with each other. All contents copyright (c) 2009 ZyXEL Communications Corporation.
WEP encryption uses a 40 bit (10 Hex character) as "secret key" (set by user), and a 24 bit "Initialization Vector" (not under user control) (40+24=64). Some vendors refer to this level of WEP as 40 bit, others as 64 bit. All contents copyright (c) 2009 ZyXEL Communications Corporation.
An intruder can masquerade as that user by using this captured information. An intruder who monitors the wireless network can apply this same attack principle on the wireless. All contents copyright (c) 2009 ZyXEL Communications Corporation.
Each client attempting to access the network is uniquely identified by the switch by using the client's MAC address. All contents copyright (c) 2009 ZyXEL Communications Corporation.
Radius server but still want to benefit from it. Because WPA-PSK only requires a single password to be entered on wireless AP/gateway and wireless client. As long as the passwords match, a client will be granted access to the WLAN. All contents copyright (c) 2009 ZyXEL Communications Corporation.