Firewall Rules Configuration - ZyXEL Communications P8701T User Manual

Table 37 Firewall Rules (continued)
LABEL
Active
Name
Interface
Filter Criteria
Action
Remove
Edit
Add
Apply

7.3.1 Firewall Rules Configuration

In the Firewall Rules screen, click Add or click a rule's Edit button to display this screen and refer
to the following table for information on the labels.
Figure 44 Firewall Rules: Add
Basic Home Station VDSL2 P8701T User's Guide
DESCRIPTION
This field displays whether a firewall rule is turned on or not. Select the check box to enable
the rule. Clear the check box to disable the rule.
This displays the name of the rule.
This displays the LAN or WAN interface(s) to which this rule is applied.
This displays the filtering criteria, such as the source or destination IP addresses and subnet
mask to which this rule applies.
This displays whether the firewall silently discards packets (Drop), discards packets and
sends an ICMP message to the sender (Reject) or allows the passage of packets (Permit).
Select entries and click the Remove button to delete them.
Click the Edit button to go to the screen where you can edit the rule.
Click Add to create a new rule.
Click Apply to save your changes back to the VDSL Router.
Chapter 7 Firewall
123