Telecommuting Application With Windows Example; Table 72 Menu 14.1 Edit Dial-In User - ZyXEL Communications P-202H V2 User Manual

P-202H Plus v2 User's Guide
The following table describes the fields in this menu.

Table 72 Menu 14.1 Edit Dial-in User

FIELD
User Name
Active
Password
Callback
Phone # Supplied
by Caller
Callback Phone #
Rem CLID
Idle Time-out
Once you have configured this menu, press [ENTER] at the message "Press ENTER to Confirm..." to
save your configuration, or press [ESC] at any time to cancel.

22.6 Telecommuting Application With Windows Example

Telecommuting enables people to work at remote sites and yet still have access to the
resources in the business office. Typically, a telecommuter will use a client workstation with
TCP/IP and dial-out capabilities, e.g., a Windows® PC or a Macintosh. For telecommuters to
call in to your ZyXEL Device, you need to configure a dial-in user profile for each
telecommuter. Additionally, you need to configure the Default Dial-in User Setup to set the
operational parameters for all dial-in users.
An example of remote access server for telecommuters is shown next.
207
DESCRIPTION
This is a required field. This will be used as the login name for authentication.
Choose a descriptive word for login, for example, johndoe.
You can disallow dial-in access to this user by setting this field to inactive. Inactive
users are displayed with a [-] (minus sign) at the beginning of the name in menu
14.
Enter the password for the remote dial-in user.
This field determines if your ZyXEL Device will allow call back to this user upon
dial-in. If this option is enabled, your ZyXEL Device will call back to the user if
requested. In such a case, your ZyXEL Device will disconnect the initial call from
this user and dial back to the specified callback number (see ahead).
No - The default is no callback.
Optional - The user can choose to disable callback.
Mandatory - The user cannot disable callback.
This option allows the user to specify the call back telephone number on a call-by-
call basis. This is useful when your ZyXEL Device returns a call back to a mobile
user at different numbers, e.g., a sales rep. in a hotel.
If the setting is Yes, the user can specify and send to the ZyXEL Device the
callback number of his/her choice.
The default is No, i.e., your ZyXEL Device always calls back to the fixed callback
number.
If Phone # Supplied by Caller is No, then this is a required field. Otherwise, a N/
A will appear in the field. Enter the telephone number to which your ZyXEL Device
will call back.
If you enable CLID Authen field in menu 13, then you need to specify the
telephone number from which this user calls. Your ZyXEL Device will check the
CLID in the incoming call against the CLIDs in the database. If they do not match
and CLID Authen is Required, your ZyXEL Device will not answer the call.
Enter the idle time (in seconds). This time-out determines how long the dial-in user
can be idle before your ZyXEL Device disconnects the call when the ZyXEL
Device is calling back.
Idle time is defined as the period of time where there is no data traffic between the
dial-in user and your ZyXEL Device. The default is 100 seconds.
Chapter 22 Dial-in Setup