Figure 10-12 Callback With Clid Configuration; Figure 10-13 Configuring Clid With Callback - ZyXEL Communications Prestige 202H User Manual

Prestige on LAN 2
Rem Node Name= LAN_1
Active= Yes
Call Direction= Both
Incoming:
Rem Login= lan1
Rem Password= *******
Rem CLID= 123
Call Back= Yes
Outgoing:
My Login= lan2
My Password= ********
Authen= CHAP/PAP
Pri Phone #= 456
Sec Phone #=
Press Space Bar to Toggle.
Menu 13
Telco Options:
CLID Authen= Required
PPP Options:
Recv Authen= PAP
Compression= No
Mutual Authen= No
O/G Username=
O/G Password= ********
Multiple Link Options:
Max Trans Rate(Kbps)= 128
Callback Budget Management:
Allocated Budget(min)=
Period(hr)=
Press Space Bar to Toggle.
Dial-in Setup
Menu 11.1 - Remote Node Profile
Edit PPP Options= No
Rem IP Addr= 192.168.1.1
Edit IP= No
Telco Option:
Session Options:
Idle Timeout(sec)= 300
Press ENTER to Confirm or ESC to Cancel:

Figure 10-12 Callback With CLID Configuration

Menu 13 - Default Dial-in Setup
Press ENTER to Confirm or ESC to Cancel:

Figure 10-13 Configuring CLID With Callback

Transfer Type= 64K
Allocated Budget(min)= 0
Period(hr)= 0
Schedules=
Carrier Access Code=
Nailed-Up Connection= No
Toll Period(sec)= 0
Edit Filter Sets= No
IP Address Supplied By:
Dial-in User= Yes
IP Pool= No
IP Start Addr= N/A
IP Count(1,2)= N/A
Session Options:
Edit Filter Sets= No
Prestige 202H User's Guide
This is how the Prestige
on LAN 2 identifies the
Prestige on LAN 1.
Set this field to
Required
.
10-13