ZyWALL 10~100 Series Internet Security Gateway
FIELD
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to Confirm..." to save
your configuration, or press [ESC] at any time to cancel.
3.5
Advanced WAN Setup
Consult the manual of your WAN device connected to your Dial Backup port for
To edit the advanced setup for the Dial Backup port, move the cursor to the Edit Advanced Setup field in
Menu 2 - WAN Setup, press the [SPACE BAR] to select Yes and then press [ENTER].
AT Command Strings:
Drop DTR When Hang Up= Yes
AT Response Strings:
The following table describes fields in this menu.
Table 3-3 Advanced WAN Port Setup: AT Commands Fields
FIELD
AT Command
Strings:
Dial Enter the AT Command string to make a call.
3-4
Table 3-2 Menu 2: Dial Backup Setup
specific AT commands.
Menu 2.1 - Advanced WAN Setup
Dial= atdt
Drop= ~~+++~~ath
Answer= ata
CLID= NMBR =
Called Id=
Speed= CONNECT
Figure 3-3 Menu 2.1 Advanced WAN Setup
DESCRIPTION
Call Control:
Dial Timeout(sec)= 60
Retry Count= 0
Retry Interval(sec)= N/A
Drop Timeout(sec)= 20
Call Back Delay(sec)= 15
DESCRIPTION
EXAMPLE
DEFAULT
WAN and Dial Backup Setup
atdt