Vlan Commands; Create Vlan; Delete Vlan; To Create A Vlan V1, Tag 2 - D-Link DES-3010F Command Line Interface Reference Manual

The VLAN commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following
table.
Command

create vlan

delete vlan

config vlan
show vlan
Each command is listed, in detail, in the following sections.
create vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:

To create a VLAN v1, tag 2:

DES-3026:4#create vlan v1 tag 2
Command: create vlan v1 tag 2
Success.
DES-3026:4#
delete vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
DES-30XX Layer 2 Switch CLI Reference Manual
Parameters
<vlan_name 32> {tag <vlanid 2-4094>}
<vlan_name 32>
<vlan_name 32> {[add [tagged | untagged] | delete] <portlist>}
{<vlan_name 32>}
Used to create a VLAN on the Switch.
create vlan <vlan_name 32> {tag <vlanid 2-4094>}
This command allows the creation of a VLAN on the Switch.
<vlan_name 32> − The name of the VLAN to be created.
tag <vlanid 2-4094> − The VLAN ID of the VLAN to be created.
Allowed values = 2-4094. VLAN 1 is reserved for the default vlan set
originally on the Switch.
Each VLAN name can be up to 32 characters. Only administrator-level
users can issue this command.
Used to delete a previously configured VLAN on the Switch.
delete vlan <vlan_name 32>
This command will delete a previously configured VLAN on the
Switch.
<vlan_name 32> − The VLAN name of the VLAN to delete.
Only administrator-level users can issue this command.
96
16
VLAN C
OMMANDS