Config 802.1X Reauth; To Configure 802.1X Reauthentication For Ports 1-18 - D-Link DES-3010F Command Line Interface Reference Manual

config 802.1x init
Restrictions
Example usage:
To initialize the authentication state machine of some or all:
DES-3026:4# config 802.1x init port_based ports all
Command: config 802.1x init port_based ports all
Success.
DES-3026:4#

config 802.1x reauth

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:

To configure 802.1x reauthentication for ports 1-18:

DES-30XX Layer 2 Switch CLI Reference Manual
mac_address <macaddr> - Specifies the MAC address of the client to be
added.
Only administrator-level users can issue this command.
Used to configure the 802.1x re-authentication feature of the Switch.
config 802.1x reauth [port_based ports [<portlist> | all] | mac_based
ports [<portlist> | all] {mac_address <macaddr>}]
The config 802.1x reauth command is used to re-authenticate a previously
authenticated device based on a port number.
port_based – This instructs the Switch to re-authorize 802.1x function
based only on the port number. Ports approved for re-authorization can
then be specified.
ports <portlist> − Specifies a port or range of ports to be
reauthorized.
all − Specifies all of the ports on the Switch to be reauthorized.
mac-based - This instructs the Switch to re-authorize 802.1x function based
on a specific MAC address. Ports approved for re-authorization can then be
specified.
ports <portlist> − Specifies a port or range of ports.
all − Specifies all ports on the Switch.
mac_address <macaddr> - Specifies the MAC address of the client to add.
Only administrator-level users can issue this command.
DES-3026:4#config 802.1x reauth port_based ports 1-18
Command: config 802.1x reauth port_based ports 1-18
Success.
DES-3026:4#
135