D-Link DES-3010F Command Line Interface Reference Manual page 71

show syslog host
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show Syslog host information:
DES-3026:4#show syslog host
Command: show syslog host
Syslog Global State: Disabled
Host Id Host IP Address
-------
1
2
3
Total Entries : 3
DES-3026:4#
DES-30XX Layer 2 Switch CLI Reference Manual
Used to display the syslog hosts currently configured on the Switch.
show syslog host {<index 1-4>}
The show syslog host command is used to display the syslog
hosts that are currently configured on the Switch.
<index 1-4> − Specifies that the command will be applied to an index
of hosts. There are four available indexes, numbered 1 through 4.
None.
Severity
--------------- --------------
10.1.1.2 All
10.40.2.3 All
10.21.13.1 All
Facility UDP port
-------- --------
Local0 514
Local0 514
Local0 514
67
Status
--------
Disabled
Disabled
Disabled