Show Router_Ports - D-Link DES-3010F Command Line Interface Reference Manual

DES-3026:4#show igmp_snooping group
Command: show igmp_snooping group
VLAN Name
Multicast group: 224.0.0.2
MAC address
Reports
Port Member
Total Entries
DES-3026:4#

show router_ports

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the router ports.
DES-3026:4#show router_ports
Command: show router_ports
VLAN Name
Static router port
Dynamic router port :
Total Entries: 1
DES-3026:4#
DES-30XX Layer 2 Switch CLI Reference Manual
: default
: 01-00-5E-00-00-02
: 1
: 3,4
: 1
Used to display the currently configured router ports on the Switch.
show router_ports {vlan <vlan_name 32>} {[static | dynamic]}
This command will display the router ports currently configured on the
Switch.
<vlan_name 32> − The name of the VLAN on which the router port resides.
static − Displays router ports that have been statically configured.
dynamic − Displays router ports that have been dynamically configured.
None.
: default
: 1-10
111