Disable Rmon; Create Trusted_Host; Show Trusted_Host - D-Link DES-3010F Command Line Interface Reference Manual

disable rmon

Parameters
Restrictions
Example Usage:
To disable RMON:
DES-3026:4#disable rmon
Command: disable rmon
Success.
DES-3026:4#

create trusted_host

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create the trusted host:

show trusted_host

Purpose
Syntax
Description
Parameters
Restrictions
DES-30XX Layer 2 Switch CLI Reference Manual
on the Switch.
None.
Only administrator-level users can issue this command.
Used to create the trusted host.
create trusted_host <ipaddr>
The create trusted_host command creates the trusted host. The
Switch specification of up to four IP addresses that are allowed to
manage the Switch via in-band SNMP or TELNET based
management software. These IP addresses must be members of the
Management VLAN. If no IP addresses are specified, then there is
nothing to prevent any IP address from accessing the Switch,
provided the user knows the Username and Password.
<ipaddr> − The IP address of the trusted host to be created.
Only administrator-level users can issue this command.
DES-3026:4#create trusted_host 10.48.74.121
Command: create trusted_host 10.48.74.121
Success.
DES-3026:4#
Used to display a list of trusted hosts entered on the Switch using
the create trusted_host command above.
show trusted_host {<ipaddr>}
This command is used to display a list of trusted hosts entered on
the Switch using the create trusted_host command above.
<ipaddr> − The IP address of the trusted host.
None.
41