Show Sntp; Enable Sntp; To Enable The Sntp Function - D-Link DES-3010F Command Line Interface Reference Manual

DES-3026:4#config sntp primary 10.1.1.1 secondary 10.1.1.2 poll-interval 30
Command: config sntp primary 10.1.1.1 secondary 10.1.1.2 poll-interval 30
Success.
DES-3026:4#

show sntp

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display SNTP configuration information:
DES-3026:4#show sntp
Command: show sntp
Current Time Source
SNTP
SNTP Primary Server
SNTP Secondary Server : 10.1.1.2
SNTP Poll Interval
DES-3026:4#

enable sntp

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:

To enable the SNTP function:

DES-3026:4#enable sntp
Command: enable sntp
Success.
DES-3026:4#
DES-30XX Layer 2 Switch CLI Reference Manual
Used to display the SNTP information.
show sntp
This command will display SNTP settings information including the
source IP address, time and poll interval.
None.
None.
: System Clock
: Enabled
: 10.1.1.1
: 30 sec
Enables SNTP server support.
enable sntp
This will enable SNTP support. SNTP service must be separately
configured (see config sntp). Enabling and configuring SNTP support will
override any manually configured system time settings.
None.
Only administrator-level users can issue this command. SNTP settings
must be configured for SNTP to function (config sntp).
145