Config Command_History; To Display All Of The Commands; To Configure The Command History - D-Link DES-3010F Command Line Interface Reference Manual

Example usage

To display all of the commands:

DES-3026:4#dir
Command: dir
..
?
clear
clear arptable
clear counters
clear fdb
clear log
clear port_security_entry port
config 802.1p default_priority
config 802.1p user_priority
config 802.1x auth_mode
config 802.1x auth_parameter ports
config 802.1x auth_protocol
config 802.1x capability ports
config 802.1x init
config 802.1x reauth
config account
config arp_aging time
config command history
config cpu access_profile profile_id
config dst
CTRL+C ESC q

config command_history

Purpose
Syntax
Description
Parameters
Restrictions
Example usage

To configure the command history:

DES-30XX Layer 2 Switch CLI Reference Manual
Quit SPACE n
Used to configure the command history.
config command_history <value 1-40>
This command is used to configure the command history.
<value 1-40> − The number of previously executed commands maintained
in the buffer. Up to 40 of the latest executed commands may be viewed.
None.
DES-3026:4#config command_history 20
Command: config command_history 20
Success.
DES-3026:4#
Next Page Enter Next Entry
167
a All