Command History List; To Display All Of The Commands In The Cli - D-Link DES-3010F Command Line Interface Reference Manual

The command history list commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in
the following table.
Command
?
show command_history
dir
config command_history
Each command is listed, in detail, in the following sections.
?
Purpose
Syntax
Description
Parameters
Restrictions
Example usage

To display all of the commands in the CLI:

DES-3026:4#?
Command: ?
..
?
clear
clear arptable
clear counters
clear fdb
clear log
clear port_security_entry port
config 802.1p default_priority
config 802.1p user_priority
config 802.1x auth_mode
config 802.1x auth_parameter ports
config 802.1x auth_protocol
config 802.1x capability ports
config 802.1x init
config 802.1x reauth
config account
config arp_aging time
config command history
config cpu access_profile profile_id
config dst
CTRL+C ESC q
DES-30XX Layer 2 Switch CLI Reference Manual
Parameters
{<command>}
<value 1-40>
Used to display all commands in the Command Line Interface (CLI).
? {<command>}
This command will display all of the commands available through the
Command Line Interface (CLI).
<command> - Entering the question mark with an appropriate command
will list all the corresponding parameters for the specified command, along
with a brief description of the commands function and similar commands
having the same words in the command.
None.
Quit SPACE n
C
OMMAND
Next Page Enter Next Entry
165
27
H
ISTORY
a All
L
IST