D-Link DES-3010F Command Line Interface Reference Manual page 44

show snmp host
Parameters
Restrictions
Example usage:
To display the currently configured SNMP hosts on the Switch:
DES-3026:4#show snmp host
Command: show snmp host
SNMP Host Table
Host IP Address SNMP Version
---------------
10.48.76.23
10.48.74.100
Total Entries: 2
DES-3026:4#
enable rmon
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To enable RMON:
DES-3026:4#enable rmon
Command: enable rmon
Success.
DES-3026:4#
disable rmon
Purpose
Syntax
Description
DES-30XX Layer 2 Switch CLI Reference Manual
<ipaddr> − The IP address of a remote SNMP manager that will
receive SNMP traps generated by the Switch's SNMP agent.
None.
Community Name / SNMPv3 User Name
--------------------- ------------------------------
V2c private
V3 public
Used to enable RMON on the Switch.
enable rmon
This command is used, in conjunction with the disable rmon
command below, to enable and disable remote monitoring (RMON)
on the Switch.
None.
Only administrator-level users can issue this command.
Used to disable RMON on the Switch.
disable rmon
This command is used, in conjunction with the enable rmon
command above, to enable and disable remote monitoring (RMON)
40