Delete Snmp User; Show Snmp User - D-Link DES-3010F Command Line Interface Reference Manual

DES-3026:4#create snmp user dlink default encrypted
by_password auth md5 auth_password priv none
Command: create snmp user dlink default encrypted
by_password auth md5 auth_password priv none
Success.
DES-3026:4#

delete snmp user

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete a previously entered SNMP user on the Switch:

show snmp user

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the SNMP users currently configured on the Switch:
DES-30XX Layer 2 Switch CLI Reference Manual
Used to remove an SNMP user from an SNMP group and also to
delete the associated SNMP group.
delete snmp user <SNMPname 32>
The delete snmp user command removes an SNMP user from its
SNMP group and then deletes the associated SNMP group.
<SNMPname 32> − An alphanumeric string of up to 32 characters
that identifies the SNMP user that will be deleted.
Only administrator-level users can issue this command.
DES-3026:4#delete snmp user dlink
Command: delete snmp user dlink
Success.
DES-3026:4#
Used to display information about each SNMP username in the
SNMP group username table.
show snmp user
The show snmp user command displays information about each
SNMP username in the SNMP group username table.
None.
Only administrator-level users can issue this command.
28