Disable Sntp; Config Time; To Stop Sntp Support; To Manually Set System Time And Date Settings - D-Link DES-3010F Command Line Interface Reference Manual

disable sntp

Purpose
Syntax
Description
Parameters
Restrictions
Example:

To stop SNTP support:

DES-3026:4#disable sntp
Command: disable sntp
Success.
DES-3026:4#

config time

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:

To manually set system time and date settings:

DES-30XX Layer 2 Switch CLI Reference Manual
Disables SNTP server support.
disable sntp
This will disable SNTP support. SNTP service must be separately configured
(see config sntp).
None.
Only administrator-level users can issue this command.
Used to manually configure system time and date settings.
config time date <date ddmmmyyyy> <time hh:mm:ss>
This will configure the system time and date settings. These will be
overridden if SNTP is configured and enabled.
date – Express the date using two numerical characters for the day of the
month, three alphabetical characters for the name of the month, and four
numerical characters for the year. For example: 03aug2003.
time – Express the system time using the format hh:mm:ss, that is, two
numerical characters each for the hour using a 24-hour clock, the minute
and second. For example: 19:42:30.
Only administrator-level users can issue this command. Manually
configured system time and date settings are overridden if SNTP support is
enabled.
DES-3026:4#config time 30062003 16:30:30
Command: config time 30062003 16:30:30
Success.
DES-3026:4#
146