Disable Web; Save - D-Link DES-3010F Command Line Interface Reference Manual

To enable HTTP and configure port number:
DES-3026:4#enable web 80
Command: enable web 80
Success.
DES-3026:4#

disable web

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable HTTP:
DES-3026:4#disable web
Command: disable web
Success.
DES-3026:4#

save

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To save the Switch's current configuration to non-volatile RAM:
DES-3026:4#save
Command: save
Saving all configurations to NV-RAM... Done.
DES-3026:4#
DES-30XX Layer 2 Switch CLI Reference Manual
Used to disable the HTTP-based management software on the
Switch.
disable web
This command disables the Web-based management software on
the Switch.
None.
Only administrator-level users can issue this command.
Used to save changes in the Switch's configuration to non-volatile
RAM.
save
This command is used to enter the current switch configuration into
non-volatile RAM. The saved switch configuration will be loaded into
the Switch's memory each time the Switch is restarted.
None.
Only administrator-level users can issue this command.
18