Enable Mirror; Disable Mirror; Show Mirror - D-Link DES-3010F Command Line Interface Reference Manual

enable mirror

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable mirroring configurations:
DES-3026:4#enable mirror
Command: enable mirror
Success.
DES-3026:4#

disable mirror

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable mirroring configurations:
DES-3026:4#disable mirror
Command: disable mirror
Success.
DES-3026:4#

show mirror

Purpose
Syntax
Description
Parameters
Restrictions
DES-30XX Layer 2 Switch CLI Reference Manual
Used to enable a previously entered port mirroring configuration.
enable mirror
This command, combined with the disable mirror command below, allows a
mirror entry to be enabled on the Switch, without modifying the port mirroring
configuration.
None.
Only administrator-level users can issue this command.
Used to disable a previously entered port mirroring configuration.
disable mirror
This command, combined with the enable mirror command above, allows
a mirror entry to be disabled on the Switch, without modifying the port
mirroring configuration.
None.
Only administrator-level users can issue this command.
Used to show the current port mirroring configuration on the Switch.
show mirror
This command displays the current port mirroring configuration on the
Switch.
None.
None.
94