Delete Snmp Group; Show Snmp Groups - D-Link DES-3010F Command Line Interface Reference Manual

create snmp group
Restrictions
Example usage:
To create an SNMP group named "sg1:"
DES-3026:4#create snmp group sg1 v3 noauth_nopriv read_view v1
write_view v1 notify_view v1
Command: create snmp group sg1 v3 noauth_nopriv read_view v1
write_view v1 notify_view v1
Success.
DES-3026:4#

delete snmp group

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the SNMP group named "sg1".

show snmp groups

Purpose
Syntax
Description
Parameters
DES-30XX Layer 2 Switch CLI Reference Manual
<view_name 32> − An alphanumeric string of up to 32
characters that is used to identify the group of MIB objects that
a remote SNMP manager is allowed to access on the Switch.
Only administrator-level users can issue this command.
Used to remove an SNMP group from the Switch.
delete snmp group <groupname 32>
The delete snmp group command is used to remove an SNMP
group from the Switch.
<groupname 32> − An alphanumeric name of up to 32 characters
that will identify the SNMP group with which the new SNMP user
will be associated.
Only administrator-level users can issue this command.
DES-3026:4#delete snmp group sg1
Command: delete snmp group sg1
Success.
DES-3026:4#
Used to display the group-names of SNMP groups currently
configured on the Switch. The security model, level, and status of
each group are also displayed.
show snmp groups
The show snmp groups command displays the group-names of
SNMP groups currently configured on the Switch. The security
model, level, and status of each group are also displayed.
None.
35