show 802.1p user_priority
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show 802.1p user priority:
config 802.1p default_priority
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure 802.1p default priority on the Switch:
DES-30XX Layer 2 Switch CLI Reference Manual
Used to display the current mapping between an incoming packet's
802.1p priority value and one of the Switch's four hardware priority
classes of service.
show 802.1p user_priority
The show 802.1p user_priority command displays the current
mapping of an incoming packet's 802.1p priority value to one of the
Switch's four hardware priority classes of service.
None.
None.
DES-3026:4# show 802.1p user_priority
Command: show 802.1p user_priority
QOS Class of Traffic
Priority-0 -> <Class-1>
Priority-1 -> <Class-0>
Priority-2 -> <Class-0>
Priority-3 -> <Class-1>
Priority-4 -> <Class-2>
Priority-5 -> <Class-2>
Priority-6 -> <Class-3>
Priority-7 -> <Class-3>
DES-3026:4#
Used to assign an 802.1p priority tag to an incoming untagged
packet that has no 802.1p priority tag.
config 802.1p default_priority [<portlist> | all] <priority 0-7>
The config 802.1p default_priority command allows specification
of the 802.1p priority value an untagged, incoming packet will be
assigned before being forwarded to its destination.
<portlist> − Specifies a port or range of ports to be configured.
all − Specifies that the config 802.1p default_priority command
will be applied to all ports on the Switch.
<priority 0-7> − Specifies the 802.1p priority value that an untagged,
incoming packet will be given before being forwarded to its
destination.
Only administrator-level users can issue this command.
86