Create Snmp Host; Delete Snmp Host; Show Snmp Host - D-Link DES-3010F Command Line Interface Reference Manual

create snmp host

Restrictions
Example usage:
To create an SNMP host to receive SNMP messages:
DES-3026:4#create snmp host 10.48.74.100 v3 auth_priv public
Command: create snmp host 10.48.74.100 v3 auth_priv public
Success.
DES-3026:4#

delete snmp host

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete an SNMP host entry:

show snmp host

Purpose
Syntax
Description
DES-30XX Layer 2 Switch CLI Reference Manual
Only administrator-level users can issue this command.
Used to remove a recipient of SNMP traps generated by the Switch's
SNMP agent.
delete snmp host <ipaddr>
The delete snmp host command deletes a recipient of SNMP traps
generated by the Switch's SNMP agent.
<ipaddr> − The IP address of a remote SNMP manager that will
receive SNMP traps generated by the Switch's SNMP agent.
Only administrator-level users can issue this command.
DES-3026:4#delete snmp host 10.48.74.100
Command: delete snmp host 10.48.74.100
Success.
DES-3026:4#
Used to display the recipient of SNMP traps generated by the
Switch's SNMP agent.
show snmp host {<ipaddr>}
The show snmp host command is used to display the IP addresses
and configuration information of remote SNMP managers that are
designated as recipients of SNMP traps that are generated by the
Switch's SNMP agent.
39