Clear Arptable; To Remove Dynamic Entries In The Arp Table - D-Link DES-3010F Command Line Interface Reference Manual

clear arptable

Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:

To remove dynamic entries in the ARP table:

DES-30XX Layer 2 Switch CLI Reference Manual
Used to remove all dynamic ARP table entries.
clear arptable
This command is used to remove dynamic ARP table entries from
the Switch's ARP table. Static ARP table entries are not affected.
None.
Only administrator-level users can issue this command.
DES-3026:4#clear arptable
Command: clear arptable
Success.
DES-3026:4#
154