Show Command_History; Dir; To Display The Parameters For A Specific Command; Command: Show Command_History - D-Link DES-3010F Command Line Interface Reference Manual

Example usage:

To display the parameters for a specific command:

DES-3026:4#? config igmp_snooping
Command: config igmp_snooping
Command: config igmp_snooping
Usage: [vlan_name <vlan_name 32> | all] {host_timeout <sec 1-16711450> |
router_timeout <sec 1-16711450> | leave_timer <sec 1-16711450> | state
[enabled | disabled | fast_leave [enabled | disabled]}
Description: Used to configure IGMP snooping on the switch.
config igmp_snooping querier
DES-3026:4#

show command_history

Purpose
Syntax
Description
Parameters
Restrictions
Example usage
To display the command history:
DES-3026:4#show command_history

Command: show command_history

?
? show
show vlan
config router_ports vlan2 add 1:1-1:10
config router_ports vlan2 add
config router_ports vlan2
config router_ports
show vlan
create vlan vlan2 tag 3
create vlan vlan2 tag 2
show router_ports
show router ports
login
DES-3026:4#

dir

Purpose
Syntax
Description
Parameters
Restrictions
DES-30XX Layer 2 Switch CLI Reference Manual
Used to display the command history.
show command_history
This command will display the command history.
None.
None.
Used to display all commands.
dir
This command will display all commands.
None.
None.
166