Show Igmp_Snooping; Show Igmp_Snooping Group - D-Link DES-3010F Command Line Interface Reference Manual

show igmp_snooping

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show igmp snooping:
DES-3026:4#show igmp_snooping
Command: show igmp_snooping
IGMP Snooping Global State
Multicast router Only
VLAN Name
Query Interval
Max Response Time
Robustness Value
Last Member Query Interval
Host Timeout
Route Timeout
Leave Timer
Querier State
Querier Router Behavior
State
Multicast fast leave
Total Entries: 1
DES-3026:4#

show igmp_snooping group

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show igmp snooping group:
DES-30XX Layer 2 Switch CLI Reference Manual
Used to show the current status of IGMP snooping on the Switch.
show igmp_snooping {vlan <vlan_name 32>}
This command will display the current IGMP snooping configuration on the
Switch.
<vlan_name 32> − The name of the VLAN for which to view the IGMP
snooping configuration.
None.
Used to display the current IGMP snooping group configuration on the
Switch.
show igmp_snooping group {vlan <vlan_name 32>}
This command will display the current IGMP snooping group configuration
on the Switch.
<vlan_name 32> − The name of the VLAN for which to view IGMP snooping
group configuration information.
None.
: Disabled
: Disabled
: default
: 125
: 10
: 2
: 1
: 260
: 260
: 2
: Disabled
: Non-Querier
: Disabled
: Disabled
110