Omron CJ2 CPU UNIT SOFTWARE User Manual page 82

4 CPU Unit Initialization
CPU Bus Unit Setup Area
If specific CPU Bus Units, such as Ethernet Units, Controller Link Units, or FL-net Units are used,
the particular settings for each of those Units must be made and transferred to the CPU Unit.
Example: Using an Ethernet Unit
Make the Ethernet settings using the CX-Programmer.
To make Ethernet settings, right-click the Ethernet Unit in the I/O tables of the CX-Programmer, and
then select Edit CPU Bus Unit Settings.
Make the settings for the Ethernet Unit in the I/O tables of the CX-Programmer, and then transfer the
I/O tables to the CPU Unit.
Transferring from the CX-Programmer
Make settings for the Unit
in the I/O tables and then
transfer the settings to the
Ethernet Unit.
Additional Information
If user-set data link tables are to be used with a Controller Link Unit, set the data link tables and
then save them in the CPU Unit.
4-6
Ethernet Unit
CPU Unit
ETN11
SYSMAC
RUN MS
CJ2H RUN ERC SD1 RD1
ERR/ALM NS TER1
CPU64-EIP
COMM
INH RDY ERH
PROGRAMMABLE SD2 RD2
PRPHL 100M
CONTROLLER
COMM 10M
BKUP
UNIT
OPEN NO.
NODE
MCPWR
NO.
BUSY
PERIPH ERAL
Ethernet setup
PORT
CJ2 CPU Unit Software User's Manual