Omron CJ2 CPU UNIT SOFTWARE User Manual page 55

1 Overview
Improved Debugging
Reduced Effect on Cycle Time from Online Editing
The additional cycle time due to online editing has been reduced to approx. 1 ms, minimizing the
effects on equipment operation during debugging.
Fast, High-capacity Data Tracing
1
Up to 32 Kwords of data can be traced (8 time more than previously), with ample trigger conditions,
and data can be traced continuously for long periods of time.
I/O Module Auxiliary Area Selection Function for CX-Programmer Version
9.12 or Later (CJ2M CPU Units Only)
With CX-Programmer version 9.12 or higher, the data to be traced can be easily selected from a list.
Force-set/Reset Bits in Specified EM Area Banks
With CX-Programmer version 8.3 or higher, a parameter can be set to enable force-setting/resetting
bits in specified EM Area banks. (This function is supported only by CJ2H CPU Units with unit ver-
sion 1.2 or later and CJ2M CPU Units.)
CJ2 CPU Unit Software User's Manual 1-9