Omron CJ2 CPU UNIT SOFTWARE User Manual page 365

Data Files for Automatic Transfer at Startup
The following six types of data files are used for automatic transfer at startup.
Data files for automatic transfer at startup
Automatic transfer at
startup with parame-
ter file
AUTOEXEC.IOM
ATEXECDM.IOM
AUTOEM@@.IOM
(@@: 00 to 18)
Be sure to set each of the above area types and the start addresses first when creating a data file for
automatic transfer at startup. For the storage size, set the size until the last address of the area type.
At startup, all the data on the data files in the Memory Card will be transferred starting at D20000, D0,
and E@_0. If there are not enough words for the entire area, the remaining words in the area will not be
changed.
CJ2 CPU Unit Software User's Manual
Automatic transfer at
startup without
parameter file
REPLACE.IOM Allocated DM Area
words for Special
I/O Units and CPU
Bus Units (D20000
to D32767)
REPLACDM.IOM DM Area (D00000
to D19999)
AUTOEM@@.IOM EM
(@@: 00 to 18)
10 CPU Unit Functions
Contents Range
Partial
Entire area
Entire area
Start
Size
address
20000 12,768
words
0 20,000
words
--- ---
10-31
10