Routing Tables - Omron CJ2 CPU UNIT SOFTWARE User Manual

Cj2 cpu unit software

Hide thumbs Also See for CJ2 CPU UNIT SOFTWARE:

Table of Contents

Create I/O tables to detect incorrect Unit connections when manually setting Unit slots or to manu-

ally allocate I/O in the CPU Unit. By default, CPU Unit I/O is automatically allocated in the order that

the Units are connected each time the power supply is turned ON.

Create the I/O tables by using one of the following operations from the CX-Programmer.

• Online: Perform the procedure for creating the I/O tables with connected Units.

• Offline: Edit the I/O tables (with or without the Units mounted), and then transfer the tables to the

Transferring from the CX-Programmer

Create I/O tables or edit and

then transfer I/O tables.

Routing Tables

Routing tables must be created with the CX-Integrator if more than one FINS Network Communica-

tions Unit (CPU Bus Unit) is mounted to the CPU Unit. In the local network table, a network address

is assigned to each FINS Network Communications Unit.

Set the local network table with the CX-Integrator and transfer it to the CPU Unit.

Transferring from the CX-Integrator

Transfer the routing tables.

CJ2 CPU Unit Software User's Manual

PROGRAMMABLE

Registered I/O tables

When the CPU is turned ON, the system

checks if the contents of the registered I/O

tables and the mounting conditions of the

Units are the same.

PROGRAMMAB LE

Routing tables

4 CPU Unit Initialization

Network addresses are

Table of Contents