Table of Contents
Advertisement
Operation
The self-diagnostics are run automatically by the analyzer
whenever the instrument is turned on, but the test can also be run by the
operator at will.
The first screen identifies the make and model of analyzer and has
three touch sensitive buttons along the bottom.
The buttons are:
1. Self-Test - Used to start the Self-Test diagnostic routine.
2. Factory Reset - Used to start a routine which will reset all the
instrument's settings back to the factory default values.
3. Skip - Used to display the Main screen without performing
the self-test.
If no key is pressed for 10 seconds, the system will automatically
invoke the self-test and present the Diagnostics screen.
4.2.1 Diagnostic Screen
Clicking on Self-Test (or not pressing any other button for 10
seconds) will start the internal diagnostic self-test routine. It will update
the status [PASS/FAIL] on this screen as it proceeds. The Self-Test
routine includes the following processes.
- Power supply section testing,
- Analog output section testing
- Pre-amp testing
Teledyne Analytical Instruments
3000RS-P
34
Advertisement
Table of Contents
