Table of Contents
Advertisement
Operation
90
100
The Analog Output screen has Reset, Save, and Back buttons.
1. Clicking on the Reset button
and any changes that have been made will not be saved.
2. Clicking on the Save button
values.
3. Clicking on home button
Main screen without saving the edited values.
4. Clicking on the back button
to the System screen. If any changes have been entered, a
message box will appear requesting: "Do you want to Save
the changes?" Use the Yes or No buttons to reply.
• "Yes" will save user entered values and move to the
System screen.
• "No" will discard the changes and move to System
screen.
Teledyne Analytical Instruments
0.9
18.4
1.0
20.0
will move the display to the
3000RS-P
will revert to the old values
will save the newly entered
will move the display back
70
Advertisement
Table of Contents
