Table of Contents
Advertisement
Operation
The Span Calibration Run screen has a Back arrow
pressed DURING A CALIBRATION will bring up a display which will
allow the abort the calibration without saving. Use the Yes or No
buttons to reply.
• "Yes" will ABORT the calibration and move back to
the Menu screen.
• "No" will continue the calibration.
After the calibration has FINISHED, pressing the Back arrow will
bring up a similar requester.
• "Yes" will save the calibration values and return to the
System screen.
• "No" will discard the changes and move to System
screen.
Teledyne Analytical Instruments
3000RS-P
that when
102
Advertisement
Table of Contents
