Manual Mode Zeroing - Teledyne TEXIO PTE6-200 Operating Instructions Manual

Operation
After the calibration has FINISHED, pressing the Back arrow will
bring up a similar requester.
• "Yes" will save the calibration values and return to the
System screen.
• "No" will discard the changes and move to System
screen.
4.8.1.2 M
ANUAL
When the Zero calibration mode is set to MAN and the "Touch to
Start the Calibration" button is pressed, the Zero Run screen is
displayed.
Zero Cal screen 1:
Zero Cal Manual Mode Run screen:
Teledyne Analytical Instruments
M Z
ODE EROING
3000RS-P
92