Table of Contents
Advertisement
Percent Oxygen Analyzer
Clicking on the Reset button
and any changes that have been made will not be saved.
Clicking on home button
saving the edited values.
Clicking on the Save button
A. If both Zero and Span calibration have been set "ON" and
SAVE is pressed, the following pop-up message will appear:
B. If only the Zero calibration has been set to "ON" and the
SAVE button is pressed, then the following pop-up message
will appear:
Teledyne Analytical Instruments
will revert to the previous values
will move to main screen without
will save the newly entered values.
Operation
51
Advertisement
Table of Contents
