Table of Contents
Advertisement
Operation
C. If only the span calibration is set to "ON" and the SAVE
button is pressed, the following pop-up message will appear:
D. If both zero and span calibration are set to "OFF" then no
pop-up messages will be displayed.
E. Clicking on the back button
to the System screen. If any changes have been made, then a
message box will be shown asking: "Do you want to Save the
changes". Use the Yes or No buttons to answer and dismiss
the screen.
Teledyne Analytical Instruments
3000RS-P
will move the display back
52
Advertisement
Table of Contents
