Teledyne TEXIO PTE6-200 Operating Instructions Manual page 94

Percent Oxygen Analyzer
example, if range 1 is set as 0–1 % and range 2 is set as
0–10 %, range 3 cannot be set as 0– 5 % since it is lower
than range 2.
Ranges, alarms, and spans are always set in % units. All ranges
extend from 0-100 %.
Press the edit box in the LOW range field to edit this range.
The LOW range extends from 0-100 %.
1. Click the "DEL" button to delete the one character at a time
from the Edit box.
2. Click the "ENT" Button to store the values and move back to
the parent (Range) screen.
3. Click the "back arrow" to move to the Range screen without
saving any edited values.
Use the same procedure for setting or changing the Medium and
High Ranges.
The Range screen has Reset, Save, and Back buttons.
1. Clicking on the Reset button
values and any changes that have been made will not be
saved.
2. Clicking on the Save button
values.
Teledyne Analytical Instruments
Operation
will revert back to the old
will save the newly entered
79