Table of Contents
Advertisement
Operation
1. SKIP - Skip the Test and move to the Main Screen.
2. Once self-test has completed, the display remains on the last
screen awaiting any additional user input. If no button is
pressed for 30 seconds, the system will automatically display
the Main screen.
4.2.2 Factory Reset Screen
If the Factory Reset Button is pressed on the Start Up screen, the
system will display the Factory Reset Screen. The System will calculate
the electronic offset and all the user-settable configuration parameters
will be reset to the factory default value. The Electronics Offset
calculation screen will display as follows:
The Skip button at the bottom is used to skip the electronics test
and proceed to the self-test. If the electronics offset is only partially
Teledyne Analytical Instruments
3000RS-P
36
Advertisement
Table of Contents
