Table of Contents
Advertisement
Operation
1. Enter the flow setting from 0 to 1000 SCCM.
2. Use the "DEL" button to delete a single character at a time
from the Edit box.
3. Use the "ENT" Button to store the value and move back to
the parent (Flow Limit) screen.
4. The "back arrow" button will cause the display to move back
to the Flow Limit screen without saving the edited values.
The Flow Limit screen has Reset, Save and Back buttons.
1. Clicking on the Reset button
if in case any changes have been entered.
2. Clicking on the Save button
values.
3. Clicking on home button
Main screen without saving the edited values.
4. Clicking on the back button
to the System screen. If any changes have been entered, a
message box will appear requesting: "Do you want to Save
the changes?" Use the Yes or No buttons to reply.
Teledyne Analytical Instruments
3000RS-P
will revert to the old values,
will save the newly entered
will move the display to the
will move the display back
56
Advertisement
Table of Contents
