3. Air adjustment
❶
4. Removing the head fixing bolt
A
D
D
A B
E
5. Installing the head support rod
❶ ❶
❷ ❷
❷
❸
D
C
– 5 –
Open air cock ❶ , pull up and turn air regulator knob
❷ , and adjust so that air pressure gauge ❸ indi-
cates 0.5 MPa. Then push down the knob to fix it.
* When closing air cock ❶ , air comes out.
Remove the transport fixing bolts, A, B and C,and
washer D.
It is recommended that you should keep the trans-
port bolts with care.
For portion A, tighten screw E (Part No.
SS5680740SP) supplied with the machine as ac-
cessory after removing the fixing bolt. (To prevent oil
leakage)
Insert the included head support rod ❶ into the table
❷ hole.