Operation; Names And Functions Of Operation Box Panel - JUKI MOL-254N Instruction Manual

VI. Operation

1. Names and functions of operation box panel


❾
  ❽
Name of switch
❶
Set ready switch
Pattern No.
Number of
stitches
Length of
bartacking
Width of
bartacking
❷
Set-back switch
 ❻ ❼ ❺ ❸
When this switch is pressed, the sewing machine enters the sewing
stand-by state, and the display screen changes over to the sewing
screen.
Sewing ready lamp (green) lights up in the sewing stand-by state.
When pressing the set ready switch again, the lamp goes out and
the setting screen appears.
(Caution) A hazardous state arises when this switch is turned ON,
since the belt loop supplying device operates at a high
speed. Keep your hands or any other part of your body
away from the area of loop supplying device drive and
under the presser foot of the machine.
a. This switch is used to re-set a belt loop at the stand-by position.
(Caution) 1. A hazardous state arises when this switch is turned
2. When fullness is set, if you turn on this switch while
b. When selecting step operation, this switch acts as the step-feed
switch.

❶
❷
❹
Function
ON, since the belt loop supplying device operates at a
high speed. Keep your hands or any other part of your
body away from the area of the belt loop supplying de-
vice drive and under the presser foot of the machine.
the belt loop is held in the fork, the belt loop may be
supplied twice, so turn off the power switch, remove
the belt loop, and then turn on the power switch
again.
– 16 –
Total counter
1st hook counter and set value
2nd hook counter and set value