Table of Contents
Advertisement
4. Setting screen
Internal pattern data No.
(In case of external ROM data, "E01A" is displayed.)
Setting of sewing data is performed.
The screen is displayed by pressing the program key.
When you desire to change the set value, keep pressing the standard screen key
ta-lock is released.
When you desire to lock the data again, keep pressing standard screen key
In addition, when turning ON the power, it is recommended to release the lock only when it is necessary
since the state before turning OFF the power has been stored in memory.
(1) Selection of the pattern
Internal data pattern Pattern No. starts with "P".
Press the screen change-over key
to the sewing pattern setting screen.
List of display
Sewing pattern No. is displayed.
Sewing pattern Nos. are 01 to 99 (internal patterns are 1 to 9.).
Press the screen change-over key
selection screen.
From the 10th sewing pattern, enter the sewing pattern by reading the external data
from the PM-1 and writing it on the ROM.
When the external data ROM is mounted, external data ROM has priority in display.
Number of stitches
and pattern of font which is flickering is selected. Then, screen moves
, and screen moves to the sewing pattern
External data ROM pattern Pattern No. starts with "E".
– 21 –
for 10 seconds. Da-
for 10 seconds.
Advertisement
Table of Contents
