3. Replacing loop cut moving knife
WARNING
Turn OFF the power and the air.
Take care not to cut your fingers with moving knife ❺ during work.
(1) Removing the moving knife
❸ ❸
❺ ❺
(2) Adjustment
If the top face of moving knife ❺ is not flush with moving knife mounting base (no clearance is provided
between the knife and the base), when attaching moving knife ❺ in position, loosen setscrew ❼ and perform
the adjustment by changing the position of moving knife mounting base ❻ .
❻ ❻
❼ ❼
❹ ❹
❶ ❶
❷ ❷
Remove setscrews ❶ from the loop receiver, then
remove loop receiver ❷ . Remove setscrew ❸ from
the knife presser spring collar, then remove knife
presser spring ❹ and moving knife ❺ .
When installing, follow the aforementioned proce-
dure for removing the moving knife in the reverse
order.
– 39 –