Setting Of Dip Switches - JUKI MOL-254N Instruction Manual

Table of Contents

Advertisement

6. Setting of DIP switches

Upper side of side face
No.
Name (function) of mode
SW1
Expansion of setting range
SW2
Adjustment screen protect
SW3
Thread breakage detection
SW4
Auxiliary loop feeding device
SW5
Air pressure sensor
SW6
Garment body alignment
Loop folding allowance short
SW7
mode
Sewing machine durability
SW8
operation switch
It is possible to change during turning ON the power.
Lower side of side face
No.
Name (function) of mode
SW1
Manual sewing operation
SW2
Step operation
SW3
Fullness device
Belt loop retaining when
SW4
turning ON the power
SW5
Splice detection
SW6
Cross cut
Changeover of the splice
SW7
determination
SW8
Switch for production
Perform setting of the switches after turning OFF the power, and re-turn ON the power.
DIP switches can be set when removing cover ❶
located on the right side face of the operation box.
Standard setting
OFF
When the switch is set to ON, limitation item is ineffective.
OFF
When the switch is set to ON, protect is released.
OFF
When the switch is set to ON, detection is effective.
OFF
When the switch is set to ON, the device actuates.
OFF
When the switch is set to ON, the sensor is ignored.
OFF
When this switch is set to ON, the function is effective.
ON
When the switch is set to ON, the mode is effective.
When the switch is set to ON, the drive starts (used in the
OFF
maintenance screen).
Standard setting
When the switch is set to ON, operation of the supplying
OFF
device stops.
OFF
When the switch is set to ON, step operation is effective.
When the switch is set to ON, the device operates (change
ON
of set-back operation).
OFF
When the switch is set to ON, the loop is dropped.
OFF
When the switch is set to ON, the detection is ignored.
When the switch is set to ON, the cut is changed to
OFF
straight cut.
When the switch is set to ON, the portion that is thinner
OFF
than the splice detection setting is determined to be a
splice.
OFF
Operate with the switch OFF at any time.
– 30 –
Description
Description

Advertisement

Table of Contents
loading

Table of Contents