Names And Functions Of Components - JUKI MOL-254N Instruction Manual

II. NAMES AND FUNCTIONS OF COMPONENTS
Temporary stop switch
The switch is used to temporarily stop the
machine operation.
Sewing machine head
The machine head performs
sewing while making the
motor drive the needles.
Start switch
Start switch used for
starting up the sewing.
Belt loop detector
It detects whether or not
the belt loop is normally
fed. (Optional)
Clamp feed device
The device is used to
assist in loop feeding.
Loop supplying device
Performs a series of loop
supplying procedure.
Power switch
– 3 –
Operation box panel <P.16>
The panel is used to specify/display/actuate
functions.
Thread stand
The stand is used to set
needle thread and the
thread to be supplied to
the bobbin winder.
DIP switches
Control box
Controls the whole ma-
chine.
A type (standard)
ON : Press the black button.
OFF : Press the red button.
Used to
select func-
tions.
<P.16> ap-
The
pearing in the text
above indicates that
a detailed explana-
tion for the relevant
component is given
on page(s) 16.