Adjustments; Printing Test Prints; Print Service Test Prints; Printing The Configuration Page - Tektronix PHASER 780 Service Quick Reference Manual

Adjustments

This topic discusses using the front panel's interactive mode to review and
change the printer's operation. It also contains the procedures to calibrate the
printer after you replace key Field Replaceable Units and to evaluate the printer's
functionality.

Printing test prints

The prints printed via the front panel the are generated by the image processor.
While the printer is idle you can use the front panel to print an image stored in the
image processor such as the configuration page.

Print service test prints

The service prints allow you to evaluate the printer's print quality.
1. Press the Printer Menu Select button.
2.
Select the Help Pages.
3. Scroll to either Service Print 1 or Service Print 2 and press
Print.
Printing the configuration page
The configuration page shows a great deal of information regarding the data and
set-up values stored in NVRAM. In the same Help pages menu you can also print
the startup page.
1.
Press the Printer Menu Select button.
2. With the Help pages menu displayed, scroll to the Configuration
Page menu item. Press Print.

Printing the demonstration pages

Demo pages demonstrate the capabilities of the printer.
1.
Press the Printer Menu Select button.
2. With the Help pages menu displayed, scroll to the Demonstration
Page item. Press Print.
Service Guide 73