Visual Control Of Details; Stitch Plate; Presser Foot; Feed Dog - Husqvarna 6690 Manual

The stitch plate
The stitch plate must not be damaged in any way.
Particular attention should be paid to possible
damage or unevenness around the needle hole.
Action
Exchange the damaged stitch plate.
Spare parts: See RA, page 4.
Ordering No: Stitch plate: 411 5628-01.

Presser foot

Requirements
There should be no scratches on the underside of the
presser foot.
Action
Exchange the presser foot if there are scratches on the
underside.
Comments
How the fabric is held between the presser foot and the
stitch plate plays an important role in the stitch formation.
Spare parts: See RA, page 22.
Ordering No: Zig-zag presser foot 411 1383-01
Utility stitch and pattern presser foot 411 4512-01.
The feed dog
Requirements
The upper side of the feed dog (10/1) must not be
damaged in any way, e.g. broken teeth, etc., and
should be free from fluff and pieces of thread.
Action
The faulty feed dog should be exchanged. Remove the
stitch plate. Undo the screws (10/2) and remove the feed
dog. As regards the setting of the feed dog in relation to
the stitch plate groove, see page 23.
Spare parts: See RA, page 10.
Ordering No: Feed dog 411 5910-01.
Upper side Under side
Zig-zag presser foot 411 1383-01
Utility stitch and pattern
presser foot 411 4512-01.
3