Presser Foot Height And Parallelism To The Stitch Plate - Husqvarna VIKING 350 Service Manual

5. Presser foot height and parallelism to the stitch
plate
Check
The presser foot (A) shall be parallel to the feed dog groove (B) and in its lifted position
it shall be approx. 8 mm above the stitch plate.
Adjustment
1. Loosen screw (C) and turn the presser foot until it is parallel
to the feed dog groove of the stitch plate and move it until its
lifting height is approx. 8 mm.
2. Tighten the screw.
104 72 57-26 11