Edit Your Stitch Or Lettering Program - Husqvarna Viking Sapphire 960Q User Manual

EDIT YOUR STITCH OR LETTERING
PROGRAM
TABS IN PROGRAM MODE
to each individual stitch that you have programmed. The
Menu Tab where you can choose which font you want to
Menu to open more stitches and fonts.
Insert a Stitch or Letter
Move the cursor where you want to add a stitch or letter
insert. It will be placed at the cursor.
Adjust Text and Stitches
You can mirror, adjust length and width or change the
density of the selected stitch, in the same way as when
sewing. Only the selected stitch will be adjusted.
Delete a Stitch or Letter
If you want to delete a stitch, move the cursor to the stitch
Delete. Touch & Hold Delete to delete the entire program.
Note: A straight line at the point of the Scroll Up or Down icon
indicates scroll to beginning or end.
STITCH PROGRAM COMMANDS
You can insert
the stitch program. These commands will be included in
the stitch program and will always be performed when
sewing it.
Move the cursor to the position where you want to add
a command using the scroll up/down arrows. Touch the
button or an icon on screen and it will be added into the
inserted and it also shows where the command will be
performed in the stitch program.
thread cut commands into
Sewing Information Tab
Stitch Menu
Font Menu
Stitch width
Delete
Mirror End-
to-End
Mirror Side-
to-Side
Stitch Length
P 5:3
ROGRAM